Rotary Car Club

Rotary Car Club (https://rotarycarclub.com/index.php)
-   RX-7 2nd Gen Specific (1986-92) (https://rotarycarclub.com/forumdisplay.php?f=37)
-   -   NoPis1O's Build Thread (https://rotarycarclub.com/showthread.php?t=6877)

Nopis1O 02-28-2009 05:08 PM

NoPis1O's Build Thread
 
Heres a little taste. Still trying to work out a couple kinks but its coming along.

http://i155.photobucket.com/albums/s...29_2220109.jpg

Hey RCC
I have been on this Fourm for a while some of you might know my Lowered Fc vert. fairly stock car i like to auto cross and have funn with. Well last week i picked up a 1989 fc gxl with a Individual carbed 13b with a couple mods.
Story behind the car: it was built by a guy in st louis,MO and i guess he like to drag race it. go figure. but then he sold it and it has since passed threw a couple hands to me. The people who bought it from him burnt the clutch and never fixed it. when i got the car oil and tranny fluid looked like it came straight out of the bottle. so im guessing they burnt the clutch way before they could poorly matain it. so kindof a blessing.

Here is what the car looks like now and where my Journey begins. I have already pulled the engine and tranny. im going to replace the clutch( which i have already purchased) resurface the flywheel (which is a 8 pound unknown aftermarket one) then clean and paint the engine bay before it goes back in. I have pictures of the pull but dont have them on my computer yet.

PS if anyone recognizes the car and knows who built it i would love to talk with him. (or if any board members who live in st louis want to do some research that would be awesome.)

Here is how she Sat when i got her.

http://i155.photobucket.com/albums/s...U/DSCN4163.jpg

http://i155.photobucket.com/albums/s...U/DSCN4164.jpg

http://i155.photobucket.com/albums/s...U/DSCN4165.jpg

http://i155.photobucket.com/albums/s...U/DSCN4166.jpg

http://i155.photobucket.com/albums/s...U/DSCN4167.jpg

http://i155.photobucket.com/albums/s...U/DSCN4168.jpg

http://i155.photobucket.com/albums/s...U/DSCN4169.jpg

http://i155.photobucket.com/albums/s...U/DSCN4170.jpg

http://i155.photobucket.com/albums/s...U/DSCN4171.jpg

http://i155.photobucket.com/albums/s...U/DSCN4173.jpg

Max777 02-28-2009 09:56 PM

1. Wrong section.
2. No new pics.

FAIL! :D

j/k.

Nopis1O 03-05-2009 05:37 PM

Since the first post i have done quite a bit. so heres an update

right when i got it home
http://i155.photobucket.com/albums/s...ingof09065.jpg

Engine bay
http://i155.photobucket.com/albums/s...ingof09066.jpg

http://i155.photobucket.com/albums/s...ingof09067.jpg

MSD were held on by one skrew and a few zip ties. GHETTO
http://i155.photobucket.com/albums/s...ingof09068.jpg

Battery terminals were probably the worst i have ever seen
http://i155.photobucket.com/albums/s...ingof09069.jpg

just liked that picture
http://i155.photobucket.com/albums/s...ingof09077.jpg

http://i155.photobucket.com/albums/s...ingof09076.jpg

http://i155.photobucket.com/albums/s...ingof09075.jpg

http://i155.photobucket.com/albums/s...ingof09080.jpg

need RX7 03-05-2009 05:40 PM

Looks pretty solid. Are you going to keep the carb setup or go back to EFI?

Nopis1O 03-05-2009 05:57 PM

just more pictures

http://i155.photobucket.com/albums/s...ingof09090.jpg

http://i155.photobucket.com/albums/s...ingof09085.jpg

No breaks in the whole exhaust
http://i155.photobucket.com/albums/s...ingof09100.jpg

http://i155.photobucket.com/albums/s...ingof09104.jpg

Nopis1O 03-05-2009 05:58 PM

Think im going to keep the carb set up. kinda like it

Nopis1O 03-05-2009 06:15 PM

Pulled the engine today

http://i155.photobucket.com/albums/s...ingof09115.jpg

http://i155.photobucket.com/albums/s...ingof09118.jpg

http://i155.photobucket.com/albums/s...ingof09119.jpg

http://i155.photobucket.com/albums/s...ingof09120.jpg

http://i155.photobucket.com/albums/s...ingof09121.jpg

and its out
http://i155.photobucket.com/albums/s...ingof09124.jpg

http://i155.photobucket.com/albums/s...ingof09107.jpg

couple parts i pulled that will be cleaned redone and put back on
http://i155.photobucket.com/albums/s...ingof09106.jpg

heres a picture of the tiny three inch from the header exhaust i got
http://i155.photobucket.com/albums/s...ingof09109.jpg

these were just sitting in the exhaust. should i put them back in the same way or is there some right way to put them in.
http://i155.photobucket.com/albums/s...ingof09117.jpg
shine it up
http://i155.photobucket.com/albums/s...ingof09128.jpg
http://i155.photobucket.com/albums/s...ingof09129.jpg

Nopis1O 03-05-2009 06:48 PM

there has been porting done on the engine. kinda hard to take pictures but here are some
http://i155.photobucket.com/albums/s...ingof09130.jpg
http://i155.photobucket.com/albums/s...ingof09133.jpg
http://i155.photobucket.com/albums/s...ingof09143.jpg
http://i155.photobucket.com/albums/s...ingof09142.jpg

Flooder 03-05-2009 07:45 PM

You have an S4 shifter and shift knob in there. Just thought you'd like to know :lol:.

need RX7 03-05-2009 08:10 PM

Quote:

Originally Posted by Flooder (Post 75545)
You have a much better looking S4 shifter and shift knob in there. Just thought you'd like to know :lol:.

Fixed ;) I hate the S5 shifter/knob.

Max777 03-06-2009 12:15 AM

Ok, two things again:

1: fail to give proper credit for working my ass off pulling the engine
2: didn't post pics of the old clutch.

verdict: still fail. :D

RETed 03-06-2009 12:56 AM

That thing is...hideous.
It looks like someone got pissed off at the stock fuel injection and decided to convert it to a downdraft.

Carb needs to be rebuilt?
It's leaking FUEL all over the place...
The car doesn't reek of gasoline???

Good luck tuning the carb and changing out points!
That MSD is gonna eat distro points for breakfast...

You autocross this thing?
The stock AAS is still intact.


-Ted

Max777 03-06-2009 01:11 AM

yeah, the "got pissed at the FI setup" was my guess too! Especially from how ghetto-fabbed some of the work is!

I think that there must have been two people who built this thing:

The first, who did shit proper, and the second who half assed OVER a lot of the good work already done.

Example: The distributor was HARD WIRED into the body electrical harness, there was no connector at all.

As far as the points through: does it have em? I didn't see any "points" only a magnetic pick up when I took it apart, so I dunno what points you're talking about Ted....

Whizbang 03-06-2009 02:44 AM

that intake filter thing is a bit hokey though

RETed 03-06-2009 03:05 AM

It has to be points?
I see 6 boots on top of the distributor cap.
4 are for spark plugs to the engine, and 2 are for the two coils - leading and trailing.
This is the same set-up for carb'd / distro'd 12A engines on 1st gens.


-Ted


All times are GMT -5. The time now is 08:00 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Hosted by www.GotPlacement.com