not sure about electric fan
 

Would this work for our cars. It says 240sx, but I found it under universal? Also if it did would I just need one or 2?
http://www.enjukuracing.com/isis-inc...or-p-8697.html

as long as it's 2500cfm or more you're good. Less than that and you're under stock specs and it's a waste of money.

My number 1 rule: IF the site doesn't have flow specs then move on to another site. You need to KNOW what you're buying.

http://www.summitracing.com

Just go get one from a taurus or a audi a4.. OR spend on a flex-a-lite. But yea I agree with him.. Just don't use any ole fan.

Chris

I got a $16 Fiero V6 E-fan, $25 in relays, 30A circuit breaker, wiring and thermoswitch and then soldered it all together.

werd taurus fan ftw. they flow >4000cfm or something rediculous, and are two speed. got mine for 9 bucks, altho they seem to be in higher demand now.
also be aware you will most likely need a more higher amperage alternator with any decent flowing e-fan.

I don't think this needs to be said but just in case, wire it in properly so you don't draw too much power from the alternator and kill it earlier than normal. And like Josh said, if you go with a fan like the Taurus you might need an FD alt or mod the stocker.

I got a kit from Sneed's Speed Shop that came with a E Fan, custom bent aluminum radiator shroud for the FC3S, and a package with relays n stuff... bought it together with my KOYO, used cost me $300, now my car stays cool as a mofo!

Awesome guys thanks. I didn't think it would wor kbut I wanted to be sure. I didn;t know you could use taurus fans though.