FC turbo manifolds
 

I have gotten two of these on cars now and a third is it's way to Smogsux. They work just as an equal length manifold should..... but they only cost $500. Yes, no shit $500!

All 304 stainless steel construction, 14" equal length, T4 foot print, and comes with dump tube. You can use up to a 1.32 a/r exhaust housing and it will fit around the stock a/c equipment the stock fan shroud, and the only required modification is relocating the heater return line closer to the fender well. They will fit either the Tial 44mm or the Synapse 50mm wastegates (you must specify what you intend to use when ordering).

No the stock air pump won't fit! NO you won't be emissions legal in CA with this manifold, nor any other manifold that is not stock.

For this highly anticipated public release of the only manifold that does what it should and doesn't cost you a pay check and a testicle, I will do $460 each if I can get five (5) paid individuals by Thanksgiving.

Peep the pics yo and as always let me know what you think.

Ryan

and the pics

http://shookmotorsports.com/images/P...mbIMG_0347.JPG http://shookmotorsports.com/images/P...mbIMG_0350.JPG http://shookmotorsports.com/images/P...mbIMG_0351.JPG http://shookmotorsports.com/images/P...mbIMG_0357.JPG
http://shookmotorsports.com/images/P...mbIMG_0358.JPG http://shookmotorsports.com/images/P...mbSNC00052.jpg http://shookmotorsports.com/images/P...mbSNC00054.jpg http://shookmotorsports.com/images/P...mbSNC00053.jpg http://shookmotorsports.com/images/P...mbSNC00063.jpg

hmm i think i found the turbo manifold for the rally project. wont be able to pay before thanksgiving.

Interesting - would need to see how long they'll support the heat/weight, but thats a good price... would it clear an RE lower intake though, hmmmm...

The welding looks terrific. What is the wall thickness of the tubing you're using? Glad someone is making a turbo manifold for the FC. I'm interested getting one of these. Are you looking for a deposit?

I am not sure on the RE intake manifold but I would guess yes due to space available around the twins that come on the RE. It most definitively clears the REW manifold.

As far as holding up to the heat and the weight, if it does fail on you I will repair it for free. If it's not repairable I will replace it.

Ryan

It's .063" wall on the tubing.

If you are wanting to get in on the group buy the deposit is the price, $460. If there are not enough people signed up by Thanksgiving the choice would be up to you, you could receive a full refund or pay the extra $40 and get the manifold.

Ryan

Thats good enough for me :) I'll be your RE test unless somebody else beats me to the punch. I've got to get the car to paint and then we'll see... do you offer coating by any chance?