Rotary Car Club - View Single Post - Oil Pump O-ring Mod

Rotary Inspired · 11-10-2009, 06:00 PM

I never see below 40 PSI at idle with current engine with similar results up top. I do have a the Racing Beat oil pressure reg. Idle is 1120-1200 rpms. Car is a 10AE. Very very large extended port. I actually RTV the pump to the housing where you use the hylomar. I have never had an oil pressure issue since i have started doing this 15+ motors.

11-10-2009, 06:00 PM	#17
Rotary Inspired Rotary Fan in Training Join Date: Feb 2008 Location: SW OKC Posts: 75 Rep Power: 18	I never see below 40 PSI at idle with current engine with similar results up top. I do have a the Racing Beat oil pressure reg. Idle is 1120-1200 rpms. Car is a 10AE. Very very large extended port. I actually RTV the pump to the housing where you use the hylomar. I have never had an oil pressure issue since i have started doing this 15+ motors. __________________ If you wanna become ASE certified buy the RX7.