So, I worked on the FD today for like 4 hours.
I started off by re-bleeding the line by bleeding it from pre- caliper. Started this in the rear passenger - No prob. Rear driver side, no problem. Then front driver side and no fluid came out. I mean, very very little and completely no fluid came out of the line before the caliper.
Luckily friend of mine had a spare MC so I swapped it out.. After the swap, all the lines started to bleed. I've now swapped them with new SS lines and calipers from my MB before I went RZ calipers. Brake pedal feels slightly better but still not as firm as my MB. I think its still has some air in the system. I'm going to wait a month or two to bleed it again.
|