Rotary Car Club - View Single Post - Re-chromed rotor housings

glassman · 11-18-2009, 10:18 PM

Here's some pics of the housings from my engine on tear down. I'm going to see how these come out but we have some others to try too. The flaking on the edges from the wedge trace hopefully is not too deep. I've marked the housings SFD01 and SFD02 so we can compare after they are re-chromed. The scratches seen in the pics are what I would consider acceptable for re-chrome, as long as the steel underneath is good.

11-18-2009, 10:18 PM	#17
glassman Premium Vendor Join Date: Apr 2008 Location: Canada Posts: 173 Rep Power: 18	Here's some pics of the housings from my engine on tear down. I'm going to see how these come out but we have some others to try too. The flaking on the edges from the wedge trace hopefully is not too deep. I've marked the housings SFD01 and SFD02 so we can compare after they are re-chromed. The scratches seen in the pics are what I would consider acceptable for re-chrome, as long as the steel underneath is good. __________________ Mild to wild, street to strip, when you want to go fast and you want your engine to last, NRS Ceramics is the only way to go. NRS Rotorsports nrsrotorsports@shaw.ca www.nrsrotorsports.com