|
Hey Bill, I just used the Herculiner on the plastic molding on my XJ and found some interesting shit out about it. The supplied brush leaves the most amount of texture. Too much for my fender flares. A standard short nap paint roller leaves much less. An Epoxy roller - something that you'd find at a hardware store if you're lucky or a marine store for sure will give you the least amount of texture. You can actually roll out most of the texture with that type of brush. A shutz gun gives alot of texture but the coverage isn't as good as with the roller.
The Lizard skin doesn't really suffer from the covereage problem as much as the Herculiner. It seems to want to run and pool more so be careful with that.
After all that's been said I plan on rolling both on my FC and spraying both on the FD. Reason being is that the paint onthe FC is done and if it strays, I'll have to kill someone.
__________________
-The Angry Stig-
DGRR 2009, 2011, 2012 & 2013 - Best FC
DEALS GAP!! WOOHOOOO!!!!!
2015 Audi S4 - Samantha - Zero Brap S4
2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter
2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins
1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle
1988 'Vert - In progress
1988 FC Coupe - Gretchen -The attention whore BEAST!
I'm a sick individual, what's wrong with you?
I'm pure Evil
I'm still insane, in the best possible way.
I think Brian's idea of romance is using lube.
Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion.
You win with your thread. Most everything
It's a truck with a steel gate on the back. Just a statement of fact
Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff....
No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon.
-Angry Motherf*cker Mode ENGAGED-
|