Rotary Car Club - View Single Post - Some pics of my rear mounted turbo build for my RX8

Rearmount 8 · 01-09-2010, 09:45 PM

As I said I will keep you posted on how it runs after the tuning. The guy who is doing it is very familiar with the blue and rotaries so I'm quite confident in his abilities. I used the blue cause I practically got it for free so why spend $800 if I don't need to if I can get this to work. So I figured why not, if it doesn't work then I will go a different route.

It doesn't have any resonators/mufflers but with the exhaust going directly into the turbo it quiets it down enough that it sounds almost like stock (almost) at idle and low rpm's. Now when I stomp on it all you would hear is the turbo.

01-09-2010, 09:45 PM	#11
Rearmount 8 The Newbie Join Date: Jan 2010 Posts: 29 Rep Power: 0	As I said I will keep you posted on how it runs after the tuning. The guy who is doing it is very familiar with the blue and rotaries so I'm quite confident in his abilities. I used the blue cause I practically got it for free so why spend $800 if I don't need to if I can get this to work. So I figured why not, if it doesn't work then I will go a different route. It doesn't have any resonators/mufflers but with the exhaust going directly into the turbo it quiets it down enough that it sounds almost like stock (almost) at idle and low rpm's. Now when I stomp on it all you would hear is the turbo. __________________ To be the man you gotta beat the man...WOOOOO!!!