Rotary Car Club - View Single Post

BurnVktm · 01-21-2010, 10:28 PM

So I'm building my FD to be able to take to the strip and have fun with every so often, not serious competition.

Once all said and done I'm hoping to put down some mid 10sec runs. I have a few questions regarding safety regulations(NHRA), spring stiffness/use, roll cage requirements, and the difference between a 3/4/or 5 point harness in regards to what is required for certain builds?

I'm looking at going with a 4point harness, will this be ok?

01-21-2010, 10:28 PM	#1
BurnVktm The Newbie Join Date: Jan 2010 Location: Arizona Posts: 20 Rep Power: 0	FD 1/4 strip capable street car So I'm building my FD to be able to take to the strip and have fun with every so often, not serious competition. Once all said and done I'm hoping to put down some mid 10sec runs. I have a few questions regarding safety regulations(NHRA), spring stiffness/use, roll cage requirements, and the difference between a 3/4/or 5 point harness in regards to what is required for certain builds? I'm looking at going with a 4point harness, will this be ok? __________________ 93' FD 03' Rx-8