Hello,
You may want to read this thread
http://www.aquamist.co.uk/phpBB2/vie...=1706&start=30
I have run and set up allot of rotaries at varying levels over the years, you can see video and read more on the topic as it applies to wankels
http://www.riceracing.com.au/water-injection.htm
Quite a few have followed and had similar results after following my guidance on set up and how to run it, you can achieve the same with virtually any decent "kit" does not need to be a certain vendors.
If you want a recommendation then you cant go past
Aquamist for quality and freedom of placement of injector and fluid container.
Hope this is of some help to you?.
Peter
Quote:
Originally Posted by FC3S Murray
I have been searching recently for AUX injection just because I am looking for a safety cushion for my FC. I have read countless threads from the Aussie's and how most rotaries down under run water injection.
What i want to know is which company makes the best product.
I plan on using a single nozzle set-up that will spray right before the throttle body.
I have found a couple kits for a good price:
cooling mist: http://www.coolingmist.com/pagedispl...ey=gasvehicles
Devils own: http://www.alcohol-injection.com/uni...stage-1-8.html
I have also considered doing dudeman's mechanical WI set-up.
Any input would be appreciated.
I will be running 14psi on 91 octane with my set-up(S4 13bt street ported, 62-1, 8.5:1 rotors, heavily modded) and this just seems like a smart investment. |