[TitaniumTT]

The MoTeC and the TCMux mounted up. Two things piss me off about this pic -
1) no one will ever see the billet mounts after this pic unless something goes wrong (So everyone look, and drool a little, and ohhhh and ahhhh for me.... please)
2) the sticker on the ECU is upside down. It's driving me insane



I decided to get rid of the old Prestige Alarm. It served me well, lasted about 10 years before it started acting a little hookey. So I replaced it with a Python remote start unit with a 2-way remote, 1-mile range, all the goodies. This is what it looks like AFTER I removed about 1/2 the wires. Most people just cut them short and tape them up...... I de-pin them from the harness and save the entire wire, JIC I want to add it back in later down the road.



And there is is all buttoned up with the power distribution for the MoTeC, the AIM digital dash, the coils and the solenoids. So neat, so sexy. THe only thing missing is the main distribution and 70A sealed relay which should be here any day now. That was a SEXY piece. Just had to have it.



Here is the Front Harness. Had to add the wires for the ABS sensors - IF THEY EVERY GET HERE, a few wires for the MoTeC, power going back and forth, alarm wires, etc etc etc etc etc...... such a PITA. I need a 12-14' long workbench at my next shop. This 7'ers aren't cutting it anymore.



I have a battery disconnnect switch in my car. GREAT little piece of equipment. THe only problem is, when you kill the battery, you kill everything, unless you rewire some shite. Things that you want with constant power even when the battery is off would be, radio mem, alarm, power windows, power door locks, remote trunk release, maybe something else if you want. But instead of adding an AUX fuse block, as I've done in the past, why not tap into the stock block and make use of some unused spots? This is wiring sex right here.