Rotary Car Club - View Single Post - Thinking of water injection..any recommendations?

dudemaaan · 03-12-2010, 02:38 PM

Obviously the more you run the more knock suppression and lower intake temps you'll get. It will also make a bit of a difference if your mixing 50/50 by volume or by weight. If by volume then you are still running more water then methanol. Your boost levels aren't really that high though, so you should be fine with that size nozzle and proper tuning.

03-12-2010, 02:38 PM	#8
dudemaaan Rotary Fanatic Join Date: Mar 2008 Location: Brenham, TX Posts: 335 Rep Power: 18	Obviously the more you run the more knock suppression and lower intake temps you'll get. It will also make a bit of a difference if your mixing 50/50 by volume or by weight. If by volume then you are still running more water then methanol. Your boost levels aren't really that high though, so you should be fine with that size nozzle and proper tuning. __________________ 500+ HP thanks to: Fast reacting IAT sensor thread! Mechanical Pre-turbo Water Injection Thread Dual Stock fuel pumps Thread T2 differential swap!