Rotary Car Club - View Single Post

Max777 · 04-01-2010, 12:35 PM

I had a the center bushing in my transmission cross member sag and break, when I put in the Banzai Poly bushings, it was terrible. Bought a new crossmember, and it got a lot better. I still need to replace my drive shaft and tires, but otherwise I cna drive the car under 50mph. I also think I have soem high rpm hesitations because the resistance on my TPS reads 7.1K at WOT, when it should read around 6K tops.

Hope this info helps somewhat.

04-01-2010, 12:35 PM	#11
Max777 Pirate Join Date: Mar 2008 Location: Central IL Posts: 1,323 Rep Power: 19	I had a the center bushing in my transmission cross member sag and break, when I put in the Banzai Poly bushings, it was terrible. Bought a new crossmember, and it got a lot better. I still need to replace my drive shaft and tires, but otherwise I cna drive the car under 50mph. I also think I have soem high rpm hesitations because the resistance on my TPS reads 7.1K at WOT, when it should read around 6K tops. Hope this info helps somewhat. __________________ Rotaries:They are NOT that complicated!