You have no idea Tyler. After I spent WAY too much time dicking around with the wiring, the TC, and the fuel cell (which I never finished either) I started working like a motherfucker. Worked ~40 hrs strait before I passed out.... literally curling up in the passenger seat. It was cold so I took my flannel lined car cover and wrapped myself in that for a little 6 hour nap before I went about 46 hrs strait as well. In the end there were a few little things that kicked my ass.
For example.... went to start the car for the first time and had no power to anything that I wired up. Factory shit was all fine but nothing I wired was working. WTF? So I started at the battery and worked forward. Oddly enough the main relay wasn't getting a turn on signal..... :scratch: OK.... hit the schematic and found out that the IG2 circuit passes through the fuse blocks power window circuit. Odd... whatever... I added my own powerwindow circuit so I pulled the factory's fuse. Once I figured that out, popped a fuse in and all was well.
Then there were a few gauges not working properly. Traced that to a gnd that accidentally got wrapped into the front harness. Cool, gnd that and viola. Then she wouldn't start. Not surprising with all the changes that I made. Namely injectors and coils. Now, the MoTeC is just plain awesome. You can adjust the IJPU to suit different injectors. So, theoretically if you go from a 1000cc to a 2000cc injector, you can cut the IJPU in half, and the tuning won't change
IFF the injectors are linear in thier delivery. I went with a set of ID725 and ID2000's up from the 750/1000 POS delphi basically propane injectors. I changed the IJPU to suit and she wouldn't even start. I toyed with the map slightly and got her to stumble but it hit me that the entire map was now going to be fucked becuase I was going from a very non-linear injector to a perfectly linear injector. If I post a screen shot of my map compared to a map of a car running ID's, you'll see what I mean.
Then I discovered a small fuel leak, didn't look to far into it because at this point it's like 2pm on Friday and I also found a fairly frozen FR brake caliper. It was just too much. What I should've done was focus more on my car and less on others at the end of March. Oh well, next year.... and I'm sure a bunch in between. Gives me more reason to have the FC shipped to CA for 7stock though
