Quote:
Originally Posted by project86
^^As always.. impressed by your work. Are we sure you arent a robot? The welds on that damn fuel cell are fantastic!
|
Thanks man, I was pretty much a robot at that point, the sun was coming up when I was doing that welding 
Quote:
Originally Posted by project86
Oh and i dont know if you remember this or not but when i told you i sprayed my paint at 29psi to the cap, i meant 29psi to the gun. That i believe translates to 10psi to the cap. I was just thinkin about that the other day while i was at the paint store looking at guns.
|
Cool, thanks. I generally run a little more pressure than that esp with the clear. Are you reducing the clear at all to make it lay that flat?
Quote:
Originally Posted by EJayCe996
I believe he has KG rails, and the 2nd part he didn't mention anything. I haven't seen his car/setup since he got in his M&W ignition/injectors
|
I've never been overly impressed with the KG rails, then again, I've never been impressed with really any of the aftmkt rails with the exception of one.
He probably just used a bigger o-ring. I was sternly warned about that especially with a boosted engine. I like the Guru rail mainly becuase it has the adapter buckets.
Quote:
Originally Posted by helghast7
alright just scheduled myself in for a tune!! im excited
|
Sweet! I got myself a date with Dave as well...... now you guys just need to get to OCC.
Quote:
Originally Posted by helghast7
btw anyone know where i can get a new dashpot? mines dead in the water
|
That's a good question. I don't think anyone would part with one of those if they're trying to sell a TB. you MAY have to get a whole new/used TB.
What about that Rotary Works TB? Seriously
__________________
-The Angry Stig-
DGRR 2009, 2011, 2012 & 2013 - Best FC
DEALS GAP!! WOOHOOOO!!!!!
2015 Audi S4 - Samantha - Zero Brap S4
2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter
2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins
1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle
1988 'Vert - In progress
1988 FC Coupe - Gretchen -The attention whore BEAST!
I'm a sick individual, what's wrong with you?
I'm pure Evil
I'm still insane, in the best possible way.
I think Brian's idea of romance is using lube.
Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion.
You win with your thread. Most everything
It's a truck with a steel gate on the back. Just a statement of fact
Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff....
No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon.
-Angry Motherf*cker Mode ENGAGED-
|