Rotary Car Club - View Single Post

RotaryProphet · 06-02-2010, 06:57 AM

I believe I spent around $40 or $45 for mine, which mounts directly to the EFI Hardware/Tweakit throttle bodies.

Although on further inspection, the two people I knew who had them for that price are now running ~$100. Odd.

For a slightly more junk-yard approach, I once used a 420A TPS from a neon by filling the input shaft socket with JB Weld, and then pressing it onto a plastic bag covered d-shaft on my throttle bodies. It worked for quite a long time, too, actually.

06-02-2010, 06:57 AM	#4
RotaryProphet Rotary Fanatic Join Date: Sep 2008 Posts: 147 Rep Power: 17	I believe I spent around $40 or $45 for mine, which mounts directly to the EFI Hardware/Tweakit throttle bodies. Although on further inspection, the two people I knew who had them for that price are now running ~$100. Odd. For a slightly more junk-yard approach, I once used a 420A TPS from a neon by filling the input shaft socket with JB Weld, and then pressing it onto a plastic bag covered d-shaft on my throttle bodies. It worked for quite a long time, too, actually.