View Single Post
Old 06-07-2010, 06:29 PM   #1
ZGN
Administrator
 
ZGN's Avatar
 
Join Date: Jan 2008
Location: Birmingham, AL
Posts: 2,264
Rep Power: 10
ZGN is on a distinguished road
May 2010 Old School Rotary of the Month

Congratulations to Renisis NC!
1969 Mazda Cosmo Sport L10B



Q: Congratulations for winning Ride of the Month! Tell us about how you acquired this car?
A: I stumbled across this one via the Yahoo Japan auctions, however the deal was done via direct contact. This one had been stored in a shed somewhere north of Mt Fuji for more than 10 years and has not turned a wheel in that time. It has just 80,000km on the clock which I expect to be accurate due to the finite life of the early rotary engines...the engine in it could have been rebuilt a couple of times in its life already. This all finally happened after 15 years of dreaming, another 5 of hunting and then a nervous 6 months of waiting.

Q: Favorite stretch of road to drive your car on (location)?
A: Any road will be my favourite if I'm driving the L10B.

Q: Whats the biggest reason you chose a rotary powered car to modify?
A: Not applicable.

Q: What are the future plans on this car?
A: The future plans involve getting the car registered before the years end. The path to get to that point will require the whole powertrain to be disassembled, inspected, items repaired/replaced as required, and then reassembled. Over the past couple of months I've been collecting a few bits and pieces to assist with the mechanical overhaul.

Q: What was the worst and best memory of this project?
A: Opening the shipping container to finally see her in all her glory.

Q: Any other hobbies besides cars?
A: Nah just cars....unless you would consider my family as a hobby!

Q: Anyone you'd like to thank?
A: Richard Larsen for facilitating the purchase and arranging the sea freight.

Q: Anything in the pipeline for another ROTM win?
A: Supercharged Renesis powered Mazda MX-5 Time Attack car.
http://www.rx8plus.com.au/index.php/...hic-blog-build


Full specifications listing? (mods, etc)

Chassis:
* 2005 Mazda MX-5 (NC)
* Custom designed and fabricated roll cage

Engine:
* Mazda 13B-MSP rotary engine
* High flow oil pump
* Hymee Enhanced twin screw supercharger - 400hp
* RX-8 Plus remote oil filter

Gearbox:
* Mazda RX-8 6-speed

Differential:
* Mazda RX-8 housing with 4.777 gear set and Torsen limited slip centre

Exhaust:
* Custom 3" Stainless Steel front section that splits into twin 2.5" mufflers and outlets


Brakes:
* Front - Brembo Gran Turismo 8-piston calipers and 355 x 32mm Brembo rotors
* Rear - Brembo F50 4-piston calipers and 355 x 32mm Brembo rotors
* Hydraulic handbrake

Suspension:
Tein Flex with EDFC

Wheels:
Front - Enkei RPF1 - 18 x 8.5
Rear - Enkei RPF1 - 18 x 9.5

Tyres:
Front - Toyo R888 - 225/40 R18
Rear - Toyo R888 - 255/35 R18

Plan: Continue to collect parts and information to overhaul drivetrain as it hasn't been driven in at least 11 years and maybe even as long as 20 years!
__________________
Kevin

Last edited by ZGN; 06-18-2010 at 07:13 PM.
ZGN is offline   Reply With Quote