Rotary Car Club - View Single Post - Sometimes you just have to know when to start over...

Nismo · 07-13-2010, 09:29 PM

Little update, been driving the car N/A since May 2-4, and loving every slow minute of it!

Fixing small things right now, like the wiper switch here is how I did it.

Cut an access hole in the back of the switch:

Desolder these 6 pins:

And these 6 pins:

These are the replacement replays for the ones I removed, $27 bucks for them both shipped over night from MN:

New relays in place:

Video of it not working before, you can hear nothing but the single speed works:

Here you can hear it working on all speeds:

07-13-2010, 09:29 PM	#99
Nismo 400WHP or bust Join Date: Mar 2008 Location: Kincardine, Ontario Canada Posts: 165 Rep Power: 18	Little update, been driving the car N/A since May 2-4, and loving every slow minute of it! Fixing small things right now, like the wiper switch here is how I did it. Cut an access hole in the back of the switch: Desolder these 6 pins: And these 6 pins: These are the replacement replays for the ones I removed, $27 bucks for them both shipped over night from MN: New relays in place: Video of it not working before, you can hear nothing but the single speed works: Here you can hear it working on all speeds: __________________ 1986 GXL- Being built with a 13B RE... http://www.rotarycarclub.com/rotary_...ead.php?t=9602 1986 Base-RB Exhaust, HKS filter, Solid Aluminum motor mounts, S5 TII motor, ACT Clutch, HKS SSQV, Light Weight Flywheel, Haltech E6X, 720cc 2ndaries, Koni Yellows, Tein Springs Koyo Rad, 250 WHP 230 FTLBS Stock turbo, and stock IC at 10psi. RIP!! The daily bitch- 1995.5 Toyota Tacoma- Trueflow airfilter, and Bilstein HD shocks. 2009 Toyota Corolla "S" TRD Filter... 40MPG Last edited by Nismo; 07-13-2010 at 09:33 PM.