[bbade]

Hey guys, sorry for the huge delay. I just returned from an unexpected week-long trip to Indiana. I managed to finish the passenger side prior to leaving so I will post updates asap.

Signal - I did no sanding on the plastic or metal and had no issues with adhesion, this stuff sticks! I had attempted to make a mold out of wood soaked in grease similar to something they show on the Plast-Aid website and it even stuck to that. Cleaning the bonding surfaces well with acetone should be all that you need to do to ensure a good bond; however, I would not count on it bonding with the metal, I laid down a nice thick coat encasing the metal reinforcement so I was counting on it bonding to the plastic itself.