Rotary Car Club - View Single Post

TheDriver216 · 07-20-2010, 06:05 PM

Goal Minimum: 400whp in my FB

I plan on taking a s5 6port, replace the rotors with s5 turbo rotors.
I have a 45 dcoe but im thinking it will be too small for this turbo application although ive seen 45s on boosted 13bs. So my other option/idea is a Barry Grant 650 cfm blow through carb with a j&w 4 barrel manifold.. Turbo i plan on using is a Holset hx35 or 40.. Using a dizzy. The motor will be rebuilt.. Any one have any opinions and the planned setup, carb sizes, will it meet my goals and should i street port the irons or can i make the goal on the stock ports cleaned up a bit?

07-20-2010, 06:05 PM	#1
TheDriver216 Rotary Fanatic Join Date: Feb 2008 Location: Cleveland, Ohio Posts: 159 Rep Power: 18	Future build opinions.. Goal Minimum: 400whp in my FB I plan on taking a s5 6port, replace the rotors with s5 turbo rotors. I have a 45 dcoe but im thinking it will be too small for this turbo application although ive seen 45s on boosted 13bs. So my other option/idea is a Barry Grant 650 cfm blow through carb with a j&w 4 barrel manifold.. Turbo i plan on using is a Holset hx35 or 40.. Using a dizzy. The motor will be rebuilt.. Any one have any opinions and the planned setup, carb sizes, will it meet my goals and should i street port the irons or can i make the goal on the stock ports cleaned up a bit?