|
so if my attachments work you will see from the fsm what im talking about....remember NA
1. on position no voltage at pump wiring harness (R0-3)...in yellow
note: i know two top supply voltage--- bottom two fuel level sensor
2. From FSM section 4A-74 **NA** when checking voltage at fuel pump relay...
a. ON position checked out
b. ig sw Starting no voltage from Fc which is "fuel pump switch"
c. failed to check (no time) with measuring plate open
until this point i was going to as you know rewire the fuel pump i have the materials and im in a holding pattern suggestions guys based on 1-2 info above
|