Quote:
Originally Posted by JustJeff
Pete
If I were you I'd fab up something out of fiberglass resin. First cut and tape some cardboard in the shape that will work best for you. Then paint the resin on it with some woven fiberglass. Leave the back that will contact the trim open. Once it's hardened you can take a dremel bit and sand out the cardboard. You can cut a hole for your tweeter and lay some vinyl that matches the interior.
Thats how I was considering doing mine. Then I realized the pods face the tweeters perfectly. That's when sinking one screw each through my door panels was alot more convenient than fabbing up a panel.
|
Instead of cutting up some cardboard, smear some wax over the stock plastic, then cover it with some wax paper, TIGHTLY. Apply the resin and mat ( I would use mat for the first layer, and woven for subsequent) one time and let it harden. Pop it out and now you have a mold of the original stock piece. From there, the skies the limit with where you can go with it.
__________________
-The Angry Stig-
DGRR 2009, 2011, 2012 & 2013 - Best FC
DEALS GAP!! WOOHOOOO!!!!!
2015 Audi S4 - Samantha - Zero Brap S4
2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter
2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins
1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle
1988 'Vert - In progress
1988 FC Coupe - Gretchen -The attention whore BEAST!
I'm a sick individual, what's wrong with you?
I'm pure Evil
I'm still insane, in the best possible way.
I think Brian's idea of romance is using lube.
Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion.
You win with your thread. Most everything
It's a truck with a steel gate on the back. Just a statement of fact
Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff....
No Bolt-ons allowed. Dyno'ed @
Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon.
-Angry Motherf*cker Mode ENGAGED-