Quote:
Originally Posted by lonetlan
|
If you go with the Weather Packs you will need a crimp tool. The rubber plug is crimped to the wire to hold it in place. I'm about to rewire my entire SA project as most of the wiring is in poor shape (not to mention connectors crumbling when touched) after sitting in a field for some time. I'm leaning towards that same Weather Pack kit for the majority of bits and cutting factory connectors off pigtails and replacing them with weather packs for things like tail light assemblies etc. I do plan on continuing to use new OE style connectors for items that plug into the harness like the alternator however. Luckily the wiring for a SA is much simpler than a FC!