Rotary Car Club - View Single Post - Installed new injectors, now it won't stay running

speedjunkie · 12-15-2010, 11:57 PM

Sorry. Yeah I set all that up according to the flow rates on their website. The things my friend changed were other settings. It's running and I fixed the noise problem...it was an air leak at the LIM gasket. I took it back off, put red RTV on both sides and tightened the bolts back down using a torque pattern starting from the middle and working out. No noise now. Now I just need to get it out on the road and see what my AFRs are, to see if they're safe enough to drive it to get tuned again.

Thanks Chuck!

12-15-2010, 11:57 PM	#7
speedjunkie RCC Loves Me Not You Join Date: Mar 2008 Location: Colorado Springs, CO Posts: 2,089 Rep Power: 20	Sorry. Yeah I set all that up according to the flow rates on their website. The things my friend changed were other settings. It's running and I fixed the noise problem...it was an air leak at the LIM gasket. I took it back off, put red RTV on both sides and tightened the bolts back down using a torque pattern starting from the middle and working out. No noise now. Now I just need to get it out on the road and see what my AFRs are, to see if they're safe enough to drive it to get tuned again. Thanks Chuck!