Rotary Car Club - View Single Post

1twistedrx7 · 01-10-2011, 01:25 AM

ok so the past week I have been really busy with the 20b sub frame so this is it !
first I was not wanting to hack my car and intake manifold and dry shaft.
so I installed the dry shaft, the power plant frame and the motor so that I would know where to start .I took the sub frame out and went to work this is what I came out with!

steering rack arms. oh ya you should wear safety glasses!

Drilling the holes to mount the steering rack.

01-10-2011, 01:25 AM	#1
1twistedrx7 Rotary Fanatic Join Date: Feb 2008 Posts: 411 Rep Power: 0	ok so the past week I have been really busy with the 20b sub frame so this is it ! first I was not wanting to hack my car and intake manifold and dry shaft. so I installed the dry shaft, the power plant frame and the motor so that I would know where to start .I took the sub frame out and went to work this is what I came out with! steering rack arms. oh ya you should wear safety glasses! Drilling the holes to mount the steering rack. __________________ Rotary Performance Motors(DGRRXI)sponsor 2011 RPM sale complete rebuilt your choice ported or bridge port short block W/RA seals 2300 no core required plus shipping. we now offer powder coating! 93 mb touring patring out sold! 93 vr touring sold 93vr died violently 93 ssm touring sold 93 black 20b project and a lot of money! underestimated !! http://rotorfest.lefora.com