|
I've got to pull it to do some touch up paint work in the engine bay. And I've got to pull the turbo's to port the wastegate. When I do that I'll take the mani off and see what kind of shape the sleeve is in. If the sleeve is solid, I won't. If the sleeve seems loose or if it shifted at all, or if there are signs of an exhaust leak, they yes, motor comes apart again. I've got one good REW housing, so if the sleeve is in bad shape I'll either need to find a comparable REW housing, a comparable RE housing, or take 2 of my n/a housings to Goopy for that resurfacing treatment.
As of right now though, the only things that I need to do to the engine are re-work the harness slightly to add a fuel temp sensor, and change out the intake mani gaskets. Mazdatrix didn't have them in stock so I had to re-use the old ones.... it bothers me.
__________________
-The Angry Stig-
DGRR 2009, 2011, 2012 & 2013 - Best FC
DEALS GAP!! WOOHOOOO!!!!!
2015 Audi S4 - Samantha - Zero Brap S4
2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter
2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins
1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle
1988 'Vert - In progress
1988 FC Coupe - Gretchen -The attention whore BEAST!
I'm a sick individual, what's wrong with you?
I'm pure Evil
I'm still insane, in the best possible way.
I think Brian's idea of romance is using lube.
Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion.
You win with your thread. Most everything
It's a truck with a steel gate on the back. Just a statement of fact
Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff....
No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon.
-Angry Motherf*cker Mode ENGAGED-
|