View Single Post
Old 02-14-2011, 06:37 AM   #6
RETed
RCC Addict
 
Join Date: Mar 2008
Location: Honolulu, Hawaii USA
Posts: 1,813
Rep Power: 19
RETed will become famous soon enough
Actually, after thinking about it again, I was a little off on the math...
The fronts are too tight in my book.
I would like to have 9.0" wide up front at least +20 or less - I would be more comfortable with a 9.0", +15 up front.
The 9.0" can easily take a 255 / 40 / 17, no problem, but no way that will fit up front under stock fenders.

The rears are fine in terms of clearance inside.
It's a matter of if it's going to hit the fender lip.
10.5" can easily support a 275 wide tire, but that's way too wide to fit under stock (rear) fenders.

I'm not sure what you're trying to do, but there's really no reason to run that wide wheels under an FC.
A 8.0" front and 9.0" is usually more tire (assuming 235 front and 255 rear) that most FC's need in terms of traction.


-Ted
__________________
reted_2000@yahoo.com
Technical Advisor
FC3S Pro
http://fc3spro.com/



Quote:
Originally Posted by TitaniumTT View Post
because you're only as good as your backup
RETed is offline