Quote:
Originally Posted by RX MIDGET
Hi all,
With a 13B Extend Port N/A 48IDA carb, I am guessing I need to have pressure set at 3.5 PSI.
What are the symptoms if this is:
A. Too low
B. Too high?
Thanks
|
Too high:
- bad idle (rough or high)
- floods easily
- stinks
- flames out the exhaust on decel
Too low
- runs lean or hot
- plugs might be white after a high rpm run with shutoff
- will idle fine and run fine up to certain rpms/loads and will then stumble
__________________
1980 GS stockport, Fat Nikki, RB Dual Facetfuel pumps, Holley regulator, RB Street port exhaust, 2GDFIS, MR2 MK I electric fans, 2G strut bar, relayed fans, lights and fuel pump, LEDs
Project Fat Nikki Budget 12A rebuild Video setup < $30.00