Quote:
Originally Posted by TitaniumTT
Contacts in the switches. Jump the wires from the battery through a fuse... 15A and verify that the biotch rolls up. Now you've eliminated the motor/track/anything mechanical. If the motor is good, it's the wiring/switches. Start with the switch, make sure it projects the voltage from the wires that it should, if it doesn't, crack it open and clean it up, adjust the contacts. If that's not it, it's the wiring, but I doubt it.
|
It rolls up i used 2 9v batteries and she was working fine. I hope it just the switch i hate wiring.