Rotary Car Club - View Single Post

NoDOHC · 02-25-2011, 07:59 PM

I would give 200% of my budget for this project for a fancy CDI system like you have Peter... (can I get one for $400?)

Other than that, I have personally replaced a MSD CDI system (6AL) with LS2 coils with a significant reduction in misfires and power increase of about 15 Hp (400ish horsepower N/A V8).

Strangely, I too found the CDI to misfire significantly more at idle (as TTT found).

All I want is enough ignition energy to light the air/fuel charge in my Naturally Aspirated Rotary until the VE decreases to the point that I might as well stop. I am expecting this to be between 9,000 and 10,000 RPM. I am reasonably confident that 120mJ of ignition energy will get the job done.

If every car was a Ferrari, I would be walking to work.

I just want something that is functional and inexpensive.

The LS2 coils appear to fit the bill.

I hope they do, because I have installed them on the car and will hopefully be starting it this weekend.

02-25-2011, 07:59 PM	#22
NoDOHC The quest for more torque Join Date: Sep 2008 Location: Sheboygan, Wisconsin Posts: 855 Rep Power: 17	I would give 200% of my budget for this project for a fancy CDI system like you have Peter... (can I get one for $400?) Other than that, I have personally replaced a MSD CDI system (6AL) with LS2 coils with a significant reduction in misfires and power increase of about 15 Hp (400ish horsepower N/A V8). Strangely, I too found the CDI to misfire significantly more at idle (as TTT found). All I want is enough ignition energy to light the air/fuel charge in my Naturally Aspirated Rotary until the VE decreases to the point that I might as well stop. I am expecting this to be between 9,000 and 10,000 RPM. I am reasonably confident that 120mJ of ignition energy will get the job done. If every car was a Ferrari, I would be walking to work. I just want something that is functional and inexpensive. The LS2 coils appear to fit the bill. I hope they do, because I have installed them on the car and will hopefully be starting it this weekend. __________________ 1986 GXL ('87 4-port NA - Haltech E8, LS2 Coils. Defined Autoworks Headers, Dual 2.5" Exhaust (Dual Superflow, dBX mufflers) 1991 Coupe (KYB AGX Shocks, Eibach lowering springs, RB exhaust, Stock and Automatic)