View Single Post
Old 04-13-2011, 06:09 PM   #17
Pete_89T2
Lifetime Rotorhead
 
Pete_89T2's Avatar
 
Join Date: Apr 2010
Location: Elkton, MD
Posts: 874
Rep Power: 16
Pete_89T2 is on a distinguished road
Quote:
Originally Posted by infernosg View Post
That all makes sense, but the problem I'm having is with the car on and the radiator cap off I get a lot of coolant coming up and spilling out. Maybe there was just a large air bubble pushing it all out but the pessimist in me says this is the pressure from the combustion chamber. Maybe another picture will suffice...
I forgot to mention that I remove the radiator cap after the coolant is at operating temp and circulating thru the engine - this helps avoid most of the spilling, since once it's all circulating, the level in the rad should drop a bit. But yeah, if you remove the cap while its still cold and run the engine with the cap off after just filling the radiator, lots of coolant will barf out. Just use a thick rag to keep from burning yourself, crack open the cap to the first stop to release the pressure, let any excess coolant bleed out then remove it all the way.
Pete_89T2 is offline   Reply With Quote