Rotary Car Club - View Single Post

vrracing · 07-15-2011, 01:01 PM

I know this is pretty common but I had a couple of "best practices" questions. The vert doesnt have the in-fender holes, the holes on the side of the car under the door for the plastic clips, or the holes under the car for the screws.

Is it typical for folks to use double-sided tape for everything except the side mouldings and inside the fender wells?

I'm guessing people use the screws in the fender wells so there is a real mechanical fastening somewhere, but do you do anything to protect the drilled holes so they dont become rust beachheads?

Thanks,

07-15-2011, 01:01 PM	#1
vrracing Rotating Assembly Join Date: Oct 2008 Location: TX Posts: 102 Rep Power: 17	Putting Tii skirts on a na or vert I know this is pretty common but I had a couple of "best practices" questions. The vert doesnt have the in-fender holes, the holes on the side of the car under the door for the plastic clips, or the holes under the car for the screws. Is it typical for folks to use double-sided tape for everything except the side mouldings and inside the fender wells? I'm guessing people use the screws in the fender wells so there is a real mechanical fastening somewhere, but do you do anything to protect the drilled holes so they dont become rust beachheads? Thanks, __________________ 90 S5 Vert. JDM Tii with BNR Stage1 turbo. Pineapple Racing street port. Bonez cat-forward. Corksport cat-back with Vibrant UltraQuiet resonator. RTek 2 wZeitronix w/b. HKS EBC. Vis CF Tii hood. 3000GT wing. Ground Control coilover kit with KYB AGX shocks. Red and Black leather RX8 seats. Corksport Odura lip & bumper caps, OEM Tii skirts