Rotary Car Club - View Single Post - Plain Jane OEM nothing to see here rebuild

Pete_89T2 · 12-10-2011, 08:51 AM

^That's correct, the S5 fuel rail & PD comes as a single piece, can't take them apart or purchase separately.

I'd be worried about the powder coating process buggering the PD up and making it prone to leak - I believe the powder coat process cooks the parts in an oven at like 400*F? You can reinstall the PD/rails, and before putting the UIM and everything else back on, pressurize the fuel system (jumper the yellow connector by the passenger side strut tower per the FSM) and check for leaks before ordering a new parts.

12-10-2011, 08:51 AM	#151
Pete_89T2 Lifetime Rotorhead Join Date: Apr 2010 Location: Elkton, MD Posts: 874 Rep Power: 16	^That's correct, the S5 fuel rail & PD comes as a single piece, can't take them apart or purchase separately. I'd be worried about the powder coating process buggering the PD up and making it prone to leak - I believe the powder coat process cooks the parts in an oven at like 400*F? You can reinstall the PD/rails, and before putting the UIM and everything else back on, pressurize the fuel system (jumper the yellow connector by the passenger side strut tower per the FSM) and check for leaks before ordering a new parts.