Rotary Car Club - View Single Post

Kentetsu · 02-24-2012, 10:39 PM

With the right combination of driveshafts, you can make any of the 1st gen rears fit. The only issue you will run into is with a thread change on the brake lines. I believe www.re-speed.com sells an adapter set for that purpose.

A GSL will have 4x110 spacing and disc brakes/lsd
A GSL SE will have 4x114(?) spacing and disc brakes/lsd

So, unless you want to end up with an unintended wheel change, be careful which rear you get.

.

02-24-2012, 10:39 PM	#3
Kentetsu RCC Contributor Join Date: Feb 2008 Location: Grand Rapids, Michigan Posts: 530 Rep Power: 18	With the right combination of driveshafts, you can make any of the 1st gen rears fit. The only issue you will run into is with a thread change on the brake lines. I believe www.re-speed.com sells an adapter set for that purpose. A GSL will have 4x110 spacing and disc brakes/lsd A GSL SE will have 4x114(?) spacing and disc brakes/lsd So, unless you want to end up with an unintended wheel change, be careful which rear you get. . __________________ "Learn from the past, or it will become your future...." '85 GS 12a + LSD/Sterling carb/Respeed coilovers/Respeed front swaybar/Respeed adj. rear spring perches/Illuminas/Bilsteins on rear AutoX vids @ http://www.youtube.com/user/Kentetsu1