View Single Post
Old 04-20-2008, 09:14 AM   #1
RETed
RCC Addict
 
Join Date: Mar 2008
Location: Honolulu, Hawaii USA
Posts: 1,813
Rep Power: 19
RETed will become famous soon enough
Quote:
Originally Posted by Boostmaniac View Post
Something was bothering me though about the turbo. I see absolutely no boost until 4k RPMs. This was in dead stock trim with a ghetto cat back install. I haven't verified this yet, but I assume the twin scroll is still completely functioning. At what RPM do you guys start to see boost in your S4 TII's? (I am swapping the turbo out for an S5 turbo and manifold in very good condition to see if this fixes any of my issues.)
I bet that "ghette cat back" was too restrictive.
Boost is also relative to engine load.
1st gear pull is not going to have as much boost as a 5th gear pull.
In general, the turbo starts to make positive pressure in the 2,500RPM range.
The twin scroll acutator kicks in at around 2,800RPM.
It should be making full boost by 4kRPM.
S5 turbo can make positive boost as low as 2,000RPM.

Quote:
Second, I have an 80mm Corksport DP and MP I just installed (to see if cat clogging was the culprit to my boost woes.) and I was wondering if the RB Rev TII Y pipe and Rev TII dual exhausts would bolt up to my configuration. I love the sound of the RB units and was curious if I could save money by just having them bolt up to my current configuration instead of also having to buy the RB DP and MP also.
I'd be surprised if it does.
The "Rev" spec exhaust is supposed to be proprietary, so it doesn't match with any of the stock "breaks".


-Ted
__________________
reted_2000@yahoo.com
Technical Advisor
FC3S Pro
http://fc3spro.com/



Quote:
Originally Posted by TitaniumTT View Post
because you're only as good as your backup
RETed is offline   Reply With Quote