Everything here came from a strong running engine that had an oil seal problem. Cold compression numbers were 105 all around on the front and 95 all around on the rear.
My paypal address is:
stanello@gmail.com
I've got a set of S4 T2 rotors that are clean, with useable bearings. They are a "D" and an "E" weight
$125 Shipped each or $200 Shipped for both.
I also have a set of S4 T2 housings in good shape.
Housing 1 is $150 Shipped
Housing 2 is $200 Shipped
Or both for $300 Shipped
Housing 1: Has normal S4 edge wear, and a bit of chrome flaking. Also has a moderate amount of light marks above the trailing plug hole. These marks are not deep, and you cannot catch a fingernail on them.
Housing 2: Has normal S4 edge wear and no chrome flaking. Has much less marks over the trailing plug hole and they are very light. You cannot catch a fingernail on them. This is one of the better used S4 housings I've came across.
