|
here is what the engine bay consists of now, i had to shim the Re-speed Xmember down 3/8, i also added a 1x2in tube to the bottom of the X and shortened the pan 1inch as stated before,
I added a 1 1/8 front swaybar, not exactly happy with its fitment...i hope to go to a tubular one at some point to shed a few pounds and they work nice.
here is some pics of the transmission adaptation, the only major modification to an existing part is that i had to change the bolt location on the flywheel, but i did so in a nice meaty place, I do not fear it, and even so I also have a scatter shield for it. (not shown)
|