I'm not really sure how to measure end play. I tried to wiggle it by hand without much luck, but I'm not really sure how much it's supposed to move or if I can even do it that way.
However, I did some measuring and took some pictures.
The first is confirming I measured this right. Here's a link to the thread I was going off, the post from HAILERS.
http://www.rx7club.com/2nd-generatio...d-play-944682/. My measurement was around 2mm. If I did it right, I would presume I'm ok.
Here's a pic of the pulleys lined up. They seem to line up fine. Reference:
http://aaroncake.net/RX-7/damage.htm
Please ignore the peeling paint... my project went awry.
__________________
1986 Sport: 132k miles, 5A (Sapphire Blue Metallic), Tokico Blues, Racing Beat Springs, Custom LED tailights (only S4 LED tails in the world), SSR Mark II, Racing Beat exhaust, S5 black interior, Rotary Resurrection rebuild at 120k miles
Community Service Manual
RotorWiki
"Imagination costs nothing; we could build square locomotives or fly to Mars" - Felix Wankel
Yesterday is history, tomorrow is a mystery, but today is a gift. That is why it is called the "present."