|
FWIW, I ended up picking up a set from Mazdatrix, which they apparently source from Goodridge, as the tags on the lines indicate. Anyway, unless they sent me the wrong set, these are NOT a drop-in fit. Mazdatrix isn't answering their phone today, probably off for the T-day weekend, so this job will wait till next week.
If I end up keeping these lines, they can be made to fit by grinding out the holes in the brackets a little bit for them to fit inside and clip properly just like the stockers. Took some measurements, and the round part of the new lines that is supposed to fit in the brackets is about 1/32" larger in diameter than the stock lines.
|