View Single Post
Old 12-28-2012, 11:01 PM   #72
TitaniumTT
Test Whore - Admin
 
TitaniumTT's Avatar
 
Join Date: Mar 2008
Location: Right Behind you son
Posts: 4,581
Rep Power: 10
TitaniumTT will become famous soon enough
Quote:
Originally Posted by WE3RX7 View Post
Looks like some more repairs are in order. Have to replace my reinforcement bar now as well. In this process, I plan to repaint some of the under hood areas and rust-proof brackets, etc.

As its looking now, it'll be Feb before this car is on the road again!

As it sits now...
I did find a good deal on new radiator fans (OEM) so those should be here soon so I can at least complete the radiator swap portion of this winter project.

Next up is to get the new tie rods in, install new oil lines and coolers (OEM parts, no rust and coolers are in far better shape). Then modify the liners for the oil coolers and build a new undertray since mine has seen better days:



Thinking of building a new one using ABS plastic for more strength (don't care for the aluminum versions out there). Might try and build a splitter into the mix as well, we'll see...
That is still in way better shape than mine....

excuse me.... AL ones.... please point me in that direction via a link of some sorts
__________________
-The Angry Stig-
DGRR 2009, 2011, 2012 & 2013 - Best FC

DEALS GAP!! WOOHOOOO!!!!!

2015 Audi S4 - Samantha - Zero Brap S4
2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter
2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins
1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle
1988 'Vert - In progress
1988 FC Coupe - Gretchen -The attention whore BEAST!


I'm a sick individual, what's wrong with you?
I'm pure Evil
I'm still insane, in the best possible way.
I think Brian's idea of romance is using lube.
Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion.
You win with your thread. Most everything
It's a truck with a steel gate on the back. Just a statement of fact

Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff....
No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon.
-Angry Motherf*cker Mode ENGAGED-
TitaniumTT is offline   Reply With Quote