Quote:
Originally Posted by infernosg
These will require coilovers to fit up front due to clearance to the coil spring. I had to run camber bolts to pull the tires slightly away from the spring perch to avoid rubbing but this may not be the case for you. I can include the camber bolts at no extra cost if desired.
|
I feel I should elaborate on this a little. I never really ran this wheel/tire combination on the car with stock or aftermarket springs. I did install them briefly and I don't recall there being an issue but the car never drove like that so I can't say for sure. The issue I had with the coilovers was the inner diameter of the tire on the backside was barely making contact with the spring perch. If I had a different ride height or spring preload set this may not be an issue.