Rotary Car Club - View Single Post

2gslse · 02-14-2013, 12:59 PM

I'm sure its fixable in the long run but would it help any if you either extended the lower links a little or shortened the upper links to rotate the axle? I know you cant go far without modifying the spring perch,sway bar mounts, body/wheel contact but it may be an option.

is your trans and rear parallel to each other left to right? or a slight offset to allow the u-joints to rotate? I asked about my car since the drivetrain is slightly offset left to right and was told about vibrations from u-joints if I remember correctly( go look at it Brian. look at the motor mount to x-member)

02-14-2013, 12:59 PM	#104
2gslse Rotary Fanatic Join Date: Apr 2008 Location: front royal va Posts: 440 Rep Power: 18	I'm sure its fixable in the long run but would it help any if you either extended the lower links a little or shortened the upper links to rotate the axle? I know you cant go far without modifying the spring perch,sway bar mounts, body/wheel contact but it may be an option. is your trans and rear parallel to each other left to right? or a slight offset to allow the u-joints to rotate? I asked about my car since the drivetrain is slightly offset left to right and was told about vibrations from u-joints if I remember correctly( go look at it Brian. look at the motor mount to x-member) __________________ ____________________________________________ 1976 Cosmo needing lots of work 1993 Rx-7 410 RWHP single turbo toy 1985 Rx-7 toy/project car 411HP stoplight terror 2001 Dodge ram 4wd.parts hauler 2016 Ram 2500 cause its a hemi 2006 VW TDI commuter __________________________________________ I guarantee there's a pregnant redneck teenager somewhere in a shitty trailer park that thinks "Ebola would be a lovely name for their child"...