Quote:
Originally Posted by Mitchocalypse
Didn't know which thread to post this in but this seems like a good fit.
RICE, a while ago I found you post this and i saved it because I saw the obvious value in it:
Is this true for ALL engines, (boosted / N/A .. carb'd?).
And the 25% - 40% value.. How did you come up with that? Experimentally or is there some math behind it?
|
Firstly I am no Oracle, or self professed guru on the topic
my 'knowledge' comes from a balance of 20 years readings/research on the subject (pre internet !), every 'paper' published, some not, face to face interviews with smarter people than me, non academic research findings from true pioneers (which I give credit too in my Aquamist thread) and a host of other sources that are not note worthy to mention on their own but all contribute.
Finally I then
prove all of this myself before I state it as Fact V's Fiction
That above recommendation you kept is my own experience that backs up my own research and that of others in this field for forced induction set up. NA I can not comment, in all of my years I have done little on that as 1) it never interested me 2) NA is gay!
The only caveat I will say in regards to what I have given and you have saved, like I say in my Aquamist 'rant' lol I only give out information that is a couple of years behind what I currently do, I am not a free service anymore like I used to be, as I found everyone who currently does this in rotary world ALL go off my old information, so I learned to keep my own IP to myself, until it is redundant to me and then I freely give that other stuff out. Needless to say my 'old' information to some people is all they need to know to be totally amazed at how good water injection is on a forced induction engine.