Rotary Car Club - View Single Post - Whizbang's RX-2

Whizbang · 05-26-2013, 10:17 PM

Started swapping the FC subframe into the RX-2. all the old, worn out, garage of a suspension and steering. Made the front brackets are they are welded in. Took forever to get them right using the dial caliper so they should be as close as possible.

Need more cutting discs to clearance the rear. then i can box that and make the rear mounts.

05-26-2013, 10:17 PM	#11
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp Posts: 3,190 Rep Power: 21	Started swapping the FC subframe into the RX-2. all the old, worn out, garage of a suspension and steering. Made the front brackets are they are welded in. Took forever to get them right using the dial caliper so they should be as close as possible. Need more cutting discs to clearance the rear. then i can box that and make the rear mounts. __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook