Rotary Car Club - View Single Post - theorie's "this is why I'm always poor" 20B-FD build.

theorie · 05-28-2013, 10:21 AM

Got back the suspension back from Advanced Race Technology with fresh powder coating in "cast silver" color. I wanted to powder coat it so it will stay cleaner - didn't care to change the color.

Also the OEM pillow ball + dust boot set came from J-Auto.net

The Powerflex bushings were super easy to install - just had to grease them up and push them in by hand. The pillow balls went in pretty easy as well using a hand press machine - locked them in with the snap rings and installed the dust boots.

Now I need to get these back on there car. I still need to pull the bearings from the hubs and clean / powder coat those as well.

05-28-2013, 10:21 AM	#23
theorie VRR PSSH Join Date: Apr 2009 Location: Sarasota, FL Posts: 113 Rep Power: 17	Got back the suspension back from Advanced Race Technology with fresh powder coating in "cast silver" color. I wanted to powder coat it so it will stay cleaner - didn't care to change the color. Also the OEM pillow ball + dust boot set came from J-Auto.net The Powerflex bushings were super easy to install - just had to grease them up and push them in by hand. The pillow balls went in pretty easy as well using a hand press machine - locked them in with the snap rings and installed the dust boots. Now I need to get these back on there car. I still need to pull the bearings from the hubs and clean / powder coat those as well. __________________ 1993 SSM, 20B (D449), SINGLE-TURBO, DIY-BUILD IN THE WORKS... \|Build Thread\| 1993 BB, 13B, SINGLE-TURBO, DAILY DRIVER \|Build Thread\| MY FACEBOOK PROFILE // BLACK LABEL ENGINEERING // ADVANCED RACE TECH // IR PERFORMANCE // THE BOOST LAB // [url=rotaryaddicts.com] Last edited by theorie; 07-05-2013 at 06:21 PM.