First layer of resin applied to the fleece:
It's a little thin in a few places (3/4 of the flange and on top) but I went through most of the quart of resin I had and all the hardener. I'll pick up some more tonight and after another good coat everything should be ready for sanding.
Also, to address a question I asked previously I think I'm going to break down and go with a Racing Beat pre-silencer/muffler combination for the exhaust. Hopefully this will keeps things quiet enough.
Another thing, I've got a bunch of stock crap still lying around I'd like to get off my hands. It's taking up too much space in the garage and I'd rather see it go to another 7 owner than to a scrap yard. Off the top of my head:
-Steel N/A hood
-GTUs viscous LSD
-S5 N/A rear end minus cover
-S5 N/A transmission (complete)
-S5 N/A transmission (minus housings)
-New AWR rear camber bar
-S5 N/A oil pump
-S5 N/A injectors
-Front/rear stationary gears
-Black cargo cover