View Single Post
Old 07-26-2013, 04:13 PM   #10
C. Ludwig
Rotary Masochist
 
Join Date: May 2008
Location: Floyds Knobs, IN
Posts: 494
Rep Power: 18
C. Ludwig is on a distinguished road
I don't remember. Probably a box end wrench. On any bleed screw you need a hose draining into a clear bottle that has brake fluid already in it. The end of the hose needs to be submerged in the fluid in the bottle. This way, when bubbles come out, you see them rise through the fluid in the bottle. Pump until you see no bubbles. You also need to start at the caliper furthest from the mc and work to the closest. Stock prop valves can also cause issues with getting all the air out if the back half of the system.
__________________
_______________________________________________



One stop Haltech, AEM, Syvecs shopping. Installation and tuning.
http://www.lms-efi.com
Free support. Drop us an email.
chris@lms-efi.com
502-515-7482
Facebook @LMS-EFI
C. Ludwig is offline