Shipped prices to the lower 48. Unless otherwise noted, all items OBO and stock parts came off of an S4 TII motor at 95,000 miles or less.
Pics here:
http://s306.photobucket.com/albums/nn273/7pursuit/
Take note of the descriptions.
Rotary Aviation OMP adapter, brand new, never even installed. This sells for $82 from RA, it's for the 2nd gen 13B. I'll sell the
adapter itself with the o-ring and installation instructions for
$70 shipped.
http://www.rotaryaviation.com/oil_in...p_adaptors.htm
As you can see in the pictures, I also have about 10' of teflon tubing to make new OMP lines, little clamps to secure the lines to the fittings, injectors/banjo bolts, new unused crush washers, brackets, OMP line sleeves, a small tank (I think about 700mL, I used it briefly as a catch can and for posterity it should be cleaned for OMP use, but the tiny amount of fluid I could get out of it was pretty clean), and the OMP actuator rod (which is slightly bent, it should be easy to reshape it to work right). I may have a few extra OMP injector fittings, injectors, or washers lying around if you want them as well.
Package deal for all the OMP parts, including the tank and vacuum spider: $160 shipped.
Individually:
-tank: $25 shipped
-OMP with rod: $80 shipped
-bag of injectors/crush washers/fittings (should be enough parts there for one whole motor): $50 shipped
-teflon tube + OMP line sleeves + ear clamps (can never remember what they're called...): $25 shipped
-vacuum spider (NEW! never used): $35 shipped
I will list more prices when I can, I am very tired.