Rotary Car Club - View Single Post - PERF/ENGINE PARTS: Tein//Aeromotive//ACT//Greddy//S4 T2 Housings-Irons-Rotors//OEM

BurntOrangeT2 · 11-14-2013, 05:56 PM

**Please send an email to cdevers2011@gmail.com for fastest response!!!!!!!!!!! I do not do dibs on parts, first to transfer money gets the item, that is the fairest way**

PayPal Address is - vickidevers@yahoo.com

Here is a new collection of items that I have either been holding on to or that I have decided to go a new route on.

**Please send an email to cdevers2011@gmail.com for fastest response!!!!!!!!!!!**

> Authentic Greddy Profec B Spec 2 boost controller. Used for 5K miles. In absolute perfect condition. Worked til the day it was pulled, held a steady 13 PSI every time. Includes all original equipment, comes with silicone vacuum line with Greddy filter, except instructions (they can be DL off Greddy's site) - $250 shipped to the lower 48 <--- WAS, NOW $200 SHIPPED!!

> Stock S5 GXL sway bar with Endlinks. Front and rear bar - $89 each shipped to the lower 48. <--- WAS, NOW $49 EACH SHIPPED!!

> Near perfect condition Blue GXL door panels with switches - $135 a piece or $250 a pair, both prices are W/O shipping. Will ship at buyers expense.<--- WAS, NOW $110 A PIECE OR $199 FOR BOTH!!!

> ACT Streetlite Flywheel, less than 14K miles - $169 Shipped to the lower 48.<--- WAS, NOW $129 SHIPPED!!!

> (2) S4 Front Irons. Both of them come with water pump housing tension bolts, stat gears, and oil pump. the one with the oil pump (pictured) has the oil feed passage blocked with JB weld so it will need to be drilled and re-tapped, photos will show this. Both have pretty general step wear, nothing excessive. All coolant walls have been gone through with a pic and 2mm file and have no weakness or missing pieces in the walls. Nothing would deem them as unusable or unsellable. These irons will be classified as T2 front Iron A and B - $130 (firm) A piece shipped to the lower 48. Iron A (no jb weld) SOLD!!! MAKE AN OFFER ON IRON B, PERFECTLY FINE JUST NEEDS OIL FEED RE-TAPPED

> (2) Rear S4 T2 Irons. Both have pretty general step wear, nothing excessive. The coolant walls have been gone through with a pic and 2mm file and have no weakness or missing pieces on IRON A. Nothing would deem it as unusable or unsellable.

IRON B has a piece of the wall that had been damaged and is missing. The person i bought this Iron from never disclosed this to me. He had tried what looks to be some sort of JB weld "fill in", photos will show this. The rest of the coolant walls are perfect. These irons will be classified as T2 Intermediate Iron A and B - $60 for IRON B shipped to the lower 48. Iron A SOLD!!!

> S4 T2 Eccentric shaft. Really good condition, no marks, gouges, scratches etc - $100 shipped to the lower 48.

If you need any additional pics please let me know. I will do package pricing!!!!!!

11-14-2013, 05:56 PM	#8
BurntOrangeT2 No phonebook but OG calls Join Date: Apr 2012 Location: Kansas City, MO Posts: 98 Rep Power: 14	Please send an email to cdevers2011@gmail.com for fastest response!!!!!!!!!!! I do not do dibs on parts, first to transfer money gets the item, that is the fairest way PayPal Address is - vickidevers@yahoo.com Here is a new collection of items that I have either been holding on to or that I have decided to go a new route on. Please send an email to cdevers2011@gmail.com for fastest response!!!!!!!!!!! > Authentic Greddy Profec B Spec 2 boost controller. Used for 5K miles. In absolute perfect condition. Worked til the day it was pulled, held a steady 13 PSI every time. Includes all original equipment, comes with silicone vacuum line with Greddy filter, except instructions (they can be DL off Greddy's site) - $250 shipped to the lower 48 <--- WAS, NOW $200 SHIPPED!! > Stock S5 GXL sway bar with Endlinks. Front and rear bar - $89 each shipped to the lower 48. <--- WAS, NOW $49 EACH SHIPPED!! > Near perfect condition Blue GXL door panels with switches - $135 a piece or $250 a pair, both prices are W/O shipping. Will ship at buyers expense.<--- WAS, NOW $110 A PIECE OR $199 FOR BOTH!!! > ACT Streetlite Flywheel, less than 14K miles - $169 Shipped to the lower 48.<--- WAS, NOW $129 SHIPPED!!! > (2) S4 Front Irons. Both of them come with water pump housing tension bolts, stat gears, and oil pump. the one with the oil pump (pictured) has the oil feed passage blocked with JB weld so it will need to be drilled and re-tapped, photos will show this. Both have pretty general step wear, nothing excessive. All coolant walls have been gone through with a pic and 2mm file and have no weakness or missing pieces in the walls. Nothing would deem them as unusable or unsellable. These irons will be classified as T2 front Iron A and B - $130 (firm) A piece shipped to the lower 48. Iron A (no jb weld) SOLD!!! MAKE AN OFFER ON IRON B, PERFECTLY FINE JUST NEEDS OIL FEED RE-TAPPED > (2) Rear S4 T2 Irons. Both have pretty general step wear, nothing excessive. The coolant walls have been gone through with a pic and 2mm file and have no weakness or missing pieces on IRON A. Nothing would deem it as unusable or unsellable. IRON B has a piece of the wall that had been damaged and is missing. The person i bought this Iron from never disclosed this to me. He had tried what looks to be some sort of JB weld "fill in", photos will show this. The rest of the coolant walls are perfect. These irons will be classified as T2 Intermediate Iron A and B - $60 for IRON B shipped to the lower 48. Iron A SOLD!!! > S4 T2 Eccentric shaft. Really good condition, no marks, gouges, scratches etc - $100 shipped to the lower 48. If you need any additional pics please let me know. I will do package pricing!!!!!! __________________ '89GXL - S4 T2 Swap, body work complete, time for paint.