Rotary Car Club - View Single Post

vrracing · 01-13-2014, 07:56 PM

I thought I'd post the pictures of the wheels installed. They are:

TSW Jaramas 17x8 40mm both front and back.

The rears have Eibach 15mm spacers with embedded lugs model 90.4.15.001.4. They included new lug nuts but they arent the same pitch as the Mazda OEM ones. Not a big deal but worth noting for completeness.

FRONTS

REARS

I think the outside of the wheels are perfectly flush with the outside of the fenders. There is no rubbing and he took it to 90mph with no vibration. I'd like to get a clearance measurement to the trailing arm.

Hope someone finds this useful someday.

01-13-2014, 07:56 PM	#2
vrracing Rotating Assembly Join Date: Oct 2008 Location: TX Posts: 102 Rep Power: 17	I thought I'd post the pictures of the wheels installed. They are: TSW Jaramas 17x8 40mm both front and back. The rears have Eibach 15mm spacers with embedded lugs model 90.4.15.001.4. They included new lug nuts but they arent the same pitch as the Mazda OEM ones. Not a big deal but worth noting for completeness. FRONTS REARS I think the outside of the wheels are perfectly flush with the outside of the fenders. There is no rubbing and he took it to 90mph with no vibration. I'd like to get a clearance measurement to the trailing arm. Hope someone finds this useful someday. __________________ 90 S5 Vert. JDM Tii with BNR Stage1 turbo. Pineapple Racing street port. Bonez cat-forward. Corksport cat-back with Vibrant UltraQuiet resonator. RTek 2 wZeitronix w/b. HKS EBC. Vis CF Tii hood. 3000GT wing. Ground Control coilover kit with KYB AGX shocks. Red and Black leather RX8 seats. Corksport Odura lip & bumper caps, OEM Tii skirts Last edited by vrracing; 01-13-2014 at 08:00 PM.